Having just shipped a few coins to collectors, I am currently reviewing my shipping methods.
A while ago, I wrote an article on another forum that received favorable response, so I'll post it again here.

Given recent talk about high eBay shipping rates*, and how some collectors have received coins shipped in a way that can only be described as
negligent, I wanted to briefly demonstrate how I ship coins. Here is my technique to protect the coins en route--it's quick and
quite economical (costs given in USD$):
1. Coin goes in flip (or air-tite capsule if I have the size); cost: 8c for flip, 25c for capsule.
2. For especially nice or rarer coins I then seal in zip-loc with silica gel to further reduce environmental hazards to the coin. After all, some packages may be subjected to rain and snow for hours while en route. Cost: ziploc was free, silica gel 5c.
3. Coin and ziploc is then taped to oversize card stock to reduce edge impacts and impart stability. Cost: free, recyclable material!
4. I wrap a layer of bubble wrap around the coin and card. Cost: 25c per sqft = 5c for this amount.
5. Everything is put into an oversize bubble mailer and double-sealed with tape. Cost: 30c.
Total material cost =
$0.48-.65 depending if a airtite capsule is used. Postage will vary between $1.25-2.70 for standard rate depending on the destination, giving us a total
$1.75-$3.35.
For this particular coin, I'll fill out a customs form because it's going to Canada; overall it's a
very economical, quick and effective process once you have all the materials on hand.


* I do realize many eBay sellers pad rates to defray their costs elsewhere, but that's a
different issue I won't discuss here.